ZYD-M mobile transformer oil filtration plant will be designed for high vacuum & low temperature of oil for achieving required results. ZYD-M model is mobile,to be mounted on your Vehicle or Skid Mounted, with enclosure, suitable for outdoor and indoor use.
ZYD-M Series is widely used in purification of all kinds of insulating oil, especially the fine purification treatment of high-grade new oil, imported oil and super-voltage transformer oil. It can be used for onsite operation in over 110KV transformers, especially even in high-latitude areas. ZYD-M series also can be used as dehumidification equipment for a variety of electric facilities. And it is widely used for oil filling for transformers and circuit breakers under vacuum condition.
|Impurity size||μ||≤1 (no free carbon)|
|Dielectric loss factors||tgδ(90°C)||≤0.001|
1. Two pumps: Vacuum pump and booster pump
2. Three-stage filter system
3. Z-shape Heater to make the heating uniformity
4. Installing oil-level floating ball and double-infrared liquid level automatic controller to control the oil level
5. Foam sensor to avoid oil leaking
6. Temperature Controller to protect the machine
7. Suitable oil filtration machine for high voltage transformer
8. Large filtration area, high capacity of holding impurities
9. Two vacuum separator to increase separating size and time and ensure the drying degree and improve dielectric strength which is higher than 75 KV.
10. Doing online oil purification of substations over 110 KV.
11. Independent function of vacuum oil filling and drying.
12. Duplex stereo flash evaporation technology
13. Equipped with pressure protective system and interlocked protective system to connect oil pump, heater and liquid level controller. If there has any fault, this oil filter will be power off automatically.
14. Saving energy and time
We also have several plans for your choose;
1.Optional P.L.C. intelligent panel control, touch screen operation and dynamic display according to user needs.
2.Optional Online PPM Meter, Optional flow meter with accumulator function.
3.Optional frequency converter, you can adjust the flow according to your needs
4.Optional external port design for transformer vacuum pumping
5.The whole structure can be made into mobile, fixed, fully enclosed, concealed, canvas, open type.
6.Optional three stage high vacuum system for higher vacuum degree work.
|Working vacuum||MPa||0.08 ～ 0.099|
|Temperature Range||℃||20 ～ 80|
|Power|| ||Three Phase 50HZ380V(as per the customer's requirements)|
Please contact us for more details.