ZYD-M mobile transformer oil filtration plant will be designed for high vacuum & low temperature of oil for achieving required results. ZYD-M model is mobile,to be mounted on your Vehicle or Skid Mounted, with enclosure, suitable for outdoor and indoor use.
ZYD-M Series is widely used in purification of all kinds of insulating oil, especially the fine purification treatment of high-grade new oil, imported oil and super-voltage transformer oil. It can be used for onsite operation in over 110KV transformers, especially even in high-latitude areas. ZYD-M series also can be used as dehumidification equipment for a variety of electric facilities. And it is widely used for oil filling for transformers and circuit breakers under vacuum condition.
|Impurity size||μ||≤1 (no free carbon)|
|Dielectric loss factors||tgδ(90°C)||≤0.001|
1. ZYD machine is equipped with two-stage vacuum pumping speed and advanced dewatering and degassing system. It adopts large-area three-dimensional flashing technology to remove harmful components such as moisture, impurities and hydrocarbons in oil quickly and efficiently, and improve the flash point and dielectric strength of insulating oil.
2. The ZYD equipment is capable of oiling and vacuuming the transformer body during installation or overhaul.
3. ZYD is equipped with a high precise filtration system, which uses high-quality filter elements and multi-stage filtration step-by-step encryption to effectively remove mechanical impurities in the oil and configure automatic detection of filter contamination.
4. ZYD machine is equipped advanced automatic thermostat control system, automatic liquid level control system, automatic defoaming control system, and automatic pressure protection system to ensure high performance operation of the equipment.
5. ZYD machine is user-friendly, low noise, easy to operate, long maintenance interval, low energy consumption and low operating cost.
6. ZYD machine is equipped with interlocking safety protection system, which is connect with oil discharge system, vacuum dehydration system, and heating system to avoid the adverse effects caused by misoperation.
We also have several plans for your choose;
1.Optional P.L.C. intelligent panel control, touch screen operation and dynamic display according to user needs.
2.Optional Online PPM Meter, Optional flow meter with accumulator function.
3.Optional frequency converter, you can adjust the flow according to your needs
4.Optional external port design for transformer vacuum pumping
5.The whole structure can be made into mobile, fixed, fully enclosed, concealed, canvas, open type.
6.Optional three stage high vacuum system for higher vacuum degree work.
|Working vacuum||MPa||0.08 ～ 0.099|
|Temperature Range||℃||20 ～ 80|
|Power|| ||Three Phase 50HZ380V(as per the customer's requirements)|
Please contact us for more details.